Online Google Dictionary

rabbet 中文解釋 wordnet sense Collocation Usage Collins Definition
Verb
/ˈrabit/,
Font size:

rabbeted, past participle; rabbets, 3rd person singular present; rabbeting, present participle; rabbeted, past tense; rabbets, plural;
  1. Make a rabbet in (a piece of wood)

  2. Join or fix (a piece of wood) to another with a rabbet

Noun
  1. A step-shaped recess cut along the edge or in the face of a piece of wood, typically forming a match to the edge or tongue of another piece
    • - a rabbet joint
  1. a rectangular groove made to hold two pieces together
  2. join with a rabbet joint
  3. A rabbet (also known as rebate) is a recess or groove cut into the edge of a piece of machineable material, usually wood. When viewed in cross-section, a rabbet is two-sided and open to the edge or end of the surface into which it is cut.
  4. A longitudinal channel, groove, or recess cut out of the edge or face of a plank of wood or other material; especially, one intended to fit another member to form a joint; To cut a rabbet in a piece of material
  5. A rectangular, longitudinal groove cut in the corner edge of a board or plank.
  6. A groove cut in a board to receive another board.
  7. A "L" shaped groove cut into the side of a wood component.
  8. The portion of the door frame the door panel is fit into. May also describe the protruding edges (typically ½” further) of a pair of doors.
  9. a narrow piece of folded metal fastened to the inside upper end of the hive body from which the frames are suspended.
  10. A cut partway through the edge of a board that is used as a part of a joint.
  11. in art, the "L" cut all around the perimeter of the frame, against which glass, mat, or picture panels are installed (see illustration).
  12. In wood working a groove cut into wood. The frame rests in a Langstroth hive are rabbets and the corners are sometimes done as rabbets and sometimes as finger or box joints.
  13. The recess or offset formed in the frame to receive door.
  14. The groove under the lip of the moulding that allows space for the mat, glass, art and mounting board.
  15. The joint where the planking or plating joins the keel.
  16. A cut or groove along or near the edge of a piece of wood that allows another piece to fit into it to form a joint. The notch is at a right angle cut.
  17. A piece of wood that has a recessed cut.
  18. The inner lip of a frame in which the picture framing materials, including the glass, mats, artwork, and backing, are held.
  19. A notch in a piece of timber made to receive the ends or sides of planks which are to be secured to it. The keel is rabbeted to receive the sides of the garboard strakes
  20. Often called a frame rest.  This is cut into the top inside edge of the hive ends and forms a recessed ridge for the frames to rest on.
  21. A technique for joining two pieces at right angles. A portion of material is removed from the edge of one piece similar to the thickness of the other piece. When the two are attached the joint is strengthened. Also called a half-lap joint.
  22. This is a rectangular cut where two surfaces are cut on the edge of a member, parallel with the grain.
  23. An L-shaped cutout formed in the edge or end of a piece of stock, usually for joinery purposes. One common example of rabbets is the recessed cuts in the backs of picture frames. Although rabbets generally have 90° corners, angled rabbets are also used occasionally.
  24. Area of the frame between the stop and the face.
  25. A two-sided L-shaped recess in sash or frame to accommodate lites or panels.